Description:

• Features: 17mm Inner Diameter, 35mm Outer Diameter, 10mm Width, Deep Groove Ball Bearing.
• The ball bearing is rubber sealed from both sides to protect the bearing from dust or any possible contamination.
• Commonly used for Electric Motors, Wheel Bearings, Agricultural, Conveying and much more.

• ID: 16.5mm
• OD:34.7mm

High Quality 10 Ball Bearings ( 6202RS ), the inner diameter is 15, outer diameter is 35 and the width is 11, this is a popular size that could be used in many applications, Bearings are made of Chrome Steel, each bearing has Double Shielded to protect the bearing from dust or any possible contamination.

• Item: Double Shielded Ball Bearings 6202RS
• Material: Chrome Steel
• Dimensions: 15mm x 35mm x 11mm
• Type: Deep groove ball bearings 6202RS
• Quantity: Lot of 2
• Equal: 6202RS

Benefits our 6201RS bearing:

• Our double seals protect it from dirt, dust, and other contaminants, which can extend the bearing's lifespan and improve its performance.

• Our sealed design helps to keep lubricant inside the bearing, which can reduce maintenance requirements and improve the bearing's efficiency.

• Helps to prevent lubricant from escaping, which can reduce the risk of environmental contamination and improve safety.

• Easy to install and maintain, making it a convenient choice.

Details:

• High quality 6201-RS 6201RS Sealed Deep Grove Ball Bearing
• Inner Diameter:12mm ; Outer Diameter: 32mm ; Thickness: 10mm
• Bearing Type (Ball Bearings -Deep Grove - Radial Bearing).
• 2 Sides Rubber Seals

Double-row, pre-lubricated, normal accuracy.
Angular Contact Ball Bearings are designed to accommodate combined loads. They accommodate radial as well as loads and tilting moments in either direction.
The load carrying capacity of angular contact ball bearings increases as the contact angle increases.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Suitable for use in commercial and industrial applications including pumps and compressors, gearboxes, and printing machines, among others.

Details:

• 3206-2RS (I.D.: 30mm, O.D.: 62mm, Width: 24mm)
• 3206-2RS bearings are sealed on BOTH SIDES to keep lubricant in
• Chromium Steel long-life bearings, smooth and low noise
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Static load rating of 27300 newtons and dynamic load rating of 27000 newtons
• Bearing Number 3206 2RS
• Bearing Type Ball Bearing
• Bore Diameter 1.18 inches inches
• Material Alloy Steel
• Measurement System Metric

Double-row, pre-lubricated, normal accuracy.
Angular Contact Ball Bearings are designed to accommodate combined loads. They accommodate radial as well as loads and tilting moments in either direction.
The load carrying capacity of angular contact ball bearings increases as the contact angle increases.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Suitable for use in commercial and industrial applications including pumps and compressors, gearboxes, and printing machines, among others.

Details:

• 3206-2RS (I.D.: 30mm, O.D.: 62mm, Width: 24mm)
• 3206-2RS bearings are sealed on BOTH SIDES to keep lubricant in
• Chromium Steel long-life bearings, smooth and low noise
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Static load rating of 27300 newtons and dynamic load rating of 27000 newtons
• Bearing Number 3206 2RS
• Bearing Type Ball Bearing
• Bore Diameter 1.18 inches inches
• Material Alloy Steel
• Measurement System Metric