Quality 835 20 30 Standard CVT Drive Belt

Fits 2-Stroke JOG Minarelli 50cc 1PE40QMB Engine

This belt fits the Hammerhead, Malaguti, TNG LS49, TNG Venice, Vento Triton and many others...

This belt fits the Hammerhead, Malaguti, TNG LS49, TNG Venice, Vento Triton and many others...

Details:

• The cogged drive belt used on most for Manco, American Sportworks, Yerf-Dog, Hammerhead and Ken-bar Karts with 5hp-7hp engines.
• Also used on for the Comet TAV2 bolt-on torque-a-verter kit.

Known to Fit:

• Comet Torq-A-Verter Series, 30 Series, TAV30, & TAV-2.
• Ken-Bar, Carter, Manco, & Kartco Go Karts.
• Hoffco & Comet Part numbers: 994-70, 203589, 203589A, 203589-W1, & 203589-W2.
• Manco part number: 285B, 286B, 286U, 485B, 906C, 5959.
• Murray part number: 12-8487.
• Baja Motorsports part number: BB65-395.
• Ken-Bar part number: 300-009.
• Stens part number: 255-299.
• Rotary part number: 8487.
• Cougar Cycle Pathfinder 200GSX (DF200GSX)

Size:

• Width: 1.91cm (¾ inch)
• Length: 68.66 cm (27 1/32 inch)
• The belt is asymmetric with a 3/4 inch wide top face, 18º angle on one side, 2.5º angle on the other side.
• Instruction is not included, professional installation is highly recommended.

How to Select the correct belt?

1. Determine the series type.
2. Measure the ”Outer Diameter” (O.D.) of the driven pulley on the jackshaft.
3. Measure the ”Center Distance” (C.D.), which is the exact distance between the center of the engine crankshaft and the center of the jackshaft, must be precise.
4. Use the two measurements, the driven pulley outer diameter and center distance measurement to determine the correct belt part number from the relevant chart below.

Note:

• Should your machine's center distance fall between the center distance (C.D.) settings listed here, select from the two belts the one with the larger outside circumference (O.C.) for best wear and to avoid machine ”creep” during idling.

Please make sure your belt number is compatible as listed below.

Compatible with the following part numbers

• Hammerhead # 9.110.018, 9.100.018-725
• Comet Bando 203590
• Comet Go Kart Belt 12-13053 by Murray
• Manco ASW 6959
• Manco Yerf Dog 9655
• Heald 203-026, 203-026 DF Belt

Commonly used on:

• Hammerhead Twister 80T Mudhead
• TrailMaster Mid XRX
• American Sportworks Vector
• PATHFINDER 200 GSX (DF200GSX)

• Length: 918mm / 36.142"
• Width: 22.5mm / .886"
• GROVE ANGLE: 30 degree
• CVT [-Continuous Variable Transmission-]

Known to fit:

• Water Cooled Linhai/Yamaha 250-300cc engines SnowDog
• Cougar Cycle FALCON 250cc

Designed to be compatible with popular brands like TaoTao, Roketa, Sunl, and Kazuma, the RedCap Gates belt is ideal for both DIY enthusiasts and professionals seeking a reliable replacement. Whether you're tackling off-road trails with your ATV, cruising on your moped, or fine-tuning your go-kart, this belt is built to improve the performance and efficiency of your ride. Its advanced materials and manufacturing quality provide long-lasting operation, making it a cost-effective solution for keeping your CVT system running smoothly without the need for frequent replacements.

• Smooth Transmission: The Gates Powerlink CVT Drive Belt 710-17-30 provides optimal power transfer in Continuous Variable Transmission (CVT) systems. Designed with accuracy, it minimizes energy loss and provides consistent performance across a range of 4-stroke ATVs, scooters, mopeds, and dirt bikes.
• High-Quality Construction: Made with premium rubber materials, this CVT belt offers exceptional durability and resistance to heat, wear, and stretching. It withstands the toughest driving conditions, providing extended service life and reliable performance on both roads and off-road terrains.
• Wide Compatibility: The 710-17-30 belt is compatible with numerous companies, including TaoTao, Roketa, Kazuma, and Sunl. Whether you’re upgrading a scooter, dirt bike, go-kart, or moped, this belt guarantees a perfect fit, supporting versatile vehicle applications for hassle-free replacement.
• Optimized Dimensions: With accurate dimensions of 710mm in length and 17mm in width, the Gates Powerlink belt ensures proper tension and alignment within your CVT system. Its accurate design improves power distribution, reducing vibrations and boosting vehicle efficiency.
• High-Performance CVT Applications: This belt is specially designed to handle high-power loads in 4-stroke engines. It ensures smooth acceleration and consistent performance, making it ideal for ATVs, go-karts, and scooters that require reliable torque for heavy-duty and recreational use.

Details:

• Material: Rubber
• Color: Black
• Type: CVT (-Continuous Variable Transmission-)
• Size: 710-17-30
• Length: 710mm / 27.953 inches
• Width: 17.0mm / 0.669 inches

Note: We recommend checking or replacing the Variator or at lease Roller Weights and Slide Plates when Replacing Belts This will help extend the life of the belt.

Drive Belt 758.5x22.3x30

Torque Converter For Kandi 200cc GoKarts & ATV's - Premium Replacement Part

Main Features and Benefits:

Experience unparalleled durability with our Bando Premium Kevlar CVT Drive Belt, specifically designed for Kandi 200cc GoKarts and ATV's. Benefit from superior Kevlar construction, ensuring optimal performance and longevity. Compatible with models KD-200GKA-2, KD-200GKM-2, KD-200GKH-2, KD-200GKJ-2, and 200ASG-1.

Crafted with precision, our drive belt boasts a length of 758mm, a top width of 22.3mm, and a groove angle of 30°. Engineered to meet the highest standards, this belt ensures a perfect fit and seamless integration with your vehicle's components.

Special Features:

• Enhanced Durability
• Optimal Performance
• Perfect Compatibility
• Cost-Efficient
• Smooth Riding Experience

Dimensions:

• Length: 758mm
• Top Width: 22.3mm
• Groove Angle: 30°
  
  Known to Fit: KD-200GKA-2, KD-200GKM-2, KD-200GKH-2, KD-200GKJ-2, 200ASG-1, Cougar Cycle TRIKE SPIDER X200